For those who don't know, the Ulfberht sword was a Viking weapon of the finest quality, made with exquisite skill from the best materials available. They were produced between 800 and 1000 CE in Scandanavia.

The PBS program Nova devoted an episode to subject of the Ulfberht sword, titled "Secrets Of the Viking Sword". The program description summarizes the episode as follows:

The Vikings were among the fiercest warriors of all time. Yet only a select few carried the ultimate weapon of their era: the feared Ulfberht sword. Fashioned using a process that would remain unknown to the Vikings' rivals for centuries, the Ulfberht was a revolutionary high-tech tool as well as a work of art. Considered one of the greatest swords ever made, it remains a fearsome weapon more than a millennium after it last saw battle. But how did Viking sword makers design and build the Ulfberht, and what was its role in history? Now, NOVA uses cutting edge science and old-fashioned detective work to reconstruct the Ulfberht and finally unravel the "Secrets of the Viking Sword."

The swords were called "Ulfberht" because of a sort of trademark inscription on the blade. Genuine Ulfberhts are distinguished from impostors in part by the way the inscription is written. A real Ulfberht blade says "+VLFBERH+T", while imitators say "+VLFBERHT+". The difference between the two is more significant than just the spelling.

Real Ulfberht:

enter image description here

Fake Ulfberht:

enter image description here

Real Ulfberhts are made of an extremely high quality, high carbon steel, and contain very few impurities. The knock offs are made with inferior steel, with less carbon and more impurities.

The Nova episode explains why Ulfberhts are superior to others:

NARRATOR: From about 800 B.C., 'til today, humans have made weapons from steel. The process starts with iron, which is found in the ground as ore. The crushed ore is heated to separate the iron from the rock. But, on its own, iron is too soft to yield a strong weapon. The trick is to add carbon, most commonly from coal or charcoal. This hardens the metal and turns it into steel. But not all steels are created equal..

ALAN WILLIAMS1: Medieval iron is both soft and brittle. This is a sample of a sword of modest quality. These long inclusions—perhaps looking a bit like sausages—these are inclusions of slag, the non-metallic part of the ore which has never been separated from the iron. The slag makes the iron brittle, which doesn't, actually, give you a terribly good sword.

NARRATOR: Medieval blacksmiths in Europe didn't make slag-free steel, because their fires weren't hot enough to fully liquefy the iron. In modern times, metals are melted at temperatures over 3,000 degrees. This separates out the slag and allows more carbon to be mixed in evenly. But in the Viking era, carbon could only be introduced incidentally, mainly through the coal in the fire, and the only way to remove the slag from the metal was to try to hammer out the impurities with each strike.

Of the thousands of European swords from the Middle Ages that have been found, all were thought to have been made from this inferior steel, until Williams analyzed the Ulfberht.

ALAN WILLIAMS: One or two swords I looked at seemed to be different. They were made of steel, which I'd never seen, before or since, in a medieval object. This seems to be a completely different material.

enter image description here

NARRATOR: The only swords Williams found that were made of this clean, high-carbon steel were those marked as Ulfberht. The metal, known as "crucible steel," gave the swords capabilities far ahead of their time. But it could only be made by melting iron at high temperatures. And no one in Europe would know how to do this for centuries.

ALAN WILLIAMS: The material used was a novel material, not found anywhere else in Europe in the middle ages.

RICHARD FURRER: The biggest mystery is where did they get this raw material? We have no archaeological evidence of any crucible steel production in Europe until 800 years later... The Vikings didn't invent crucible steel. In fact, there's no evidence that anyone in Europe knew how to make it until the industrial revolution in the 18th century. But for more than 500 years before the Ulfberht, warriors elsewhere had been fighting with crucible steel weapons.

Swordsmiths across Central Asia produced some of the greatest swords of all time, known as Damascus steel blades. Curiously, they were made from material similar to the Ulfberht.

1 Alan Williams is a Conservationist of historical weaponry and an Archaeometallurgist at the Wallace Collection in London.

With that out of the way, here's the question:

How many genuine +VLFBERH+T swords are believed to be still extant, and what does the example in the best condition look like?

*Note: You may earn a small bounty if you also say how many contemporary forgeries are still extant.

  • 2
    As interesting this question is, I don't believe this is actually known. Even the distinction you make between genuine and forgeries is hugely problematic - "+VLFBERH+T" tends to be younger than "+VLFBERHT+"
    – Semaphore
    Commented Aug 7, 2015 at 6:38
  • 3
    Honestly, IMO, the long-winded (and mostly copy-pasted) exposition dump in this question is more distracting than helpful. The people who can answer this will already know what an Ulfberht sword is, and others who are just curious can always follow the link (or just look it up on Wikipedia). You could probably condense this question down to, say, the first two and last two paragraphs without losing anything essential. Or, to put it briefly and bluntly: "tl;dr". Commented Aug 12, 2015 at 18:46

1 Answer 1


TL;DR: We don't know, but at least ~170 swords bearing - in whole or in part - some variation of "VLFBERHT" are known to exist.

Number of Extant VLFBERHT swords:

I came across the closest available approximation to an answer we're likely to get:

The finds

The number of extant sword blades with the signature Vlfberht is not known... Probably the most extensive search project has been undertaken by the Norwegian-Russian Sword Project in 1992, headed by the Museum of Natural History and Archaeology in Trondheim, Norway and sponsored by the Norwegian Research Council. The project will be published by A.N.Kirpičnikov and Anne Stalsberg. During the project period A. N. Kirpičnikov examined 111 blades in the archaeological university museums in Trondheim, Oslo and Bergen. Out of these 111 blades 98 were well enough preserved to be documented by X-ray photographs, drawings and descriptions, and Vlfberht signatures were found on 30 blades; 18 of them were previously unknown, which increased the number of Vlfberht blades found in Norway to 44. The unpublished material is included in the find list of the present study. More Vlfberht blades will undoubtedly be unearthed in the future.

For this study it was possible to collect information about 166 blades found in 23 European countries. The available published information varies from a sword only being mentioned by a competent archaeologist to fully examined and scholarly published swords. Since then I have learnt about a few more Vlfberht blades, mainly unpublished (a couple in the university museum in Trondheim; one from England; one from Czech Republic; one published from Poland with the signature variant I, reverse variant I). These have not been included into this study, but the 166 swords included are sufficient for this more or less preliminary study. To check all found blades for inscriptions is an enormous task; in Norway alone at least two and a half thousand double edged blades have to be examined.

A.N. Kirpičnikov’s findings in Norway clearly indicate that there may also be a considerable number of blades with a variety of marks, but without signatures: 30 of the 98 documented blades have marks of the same type as the reverse marks of Vlfberht blades, and 20 of the 98 have different, but mostly geometric signs welded into the blade. This indicates that geometrical and other marks were frequently welded into sword blades which have no signature, and it demonstrates that the technique of welding rods into the blade to make marks and signatures was known in many countries in Europe, This is a point to be kept in mind when discussing the question if Vlfberht blades or signatures may have been copied or falsified.

enter image description here

The typology of the variants on Fig. 2 is based on 135 Vlfberht signatures and 99 reverse marks, which are well enough documented in publications and by A.N. Kirpičnikov’s mainly unpublished drawings from the Norwegian-Russian Sword Project. The numbers of signatures and reverse marks in each variant are given brackets. The numbers are not exact for all signature variants, since not all signatures are clearly enough visible or preserved to be read and included in one of the defined groups of variants.

Seven variants of both signatures and reverse marks may give the impression of a great variety of signatures, but when one takes into regard the number of blades in the different variants**, it is clear that there are in reality only two main variants of Vlfberht signatures, namely variant 1 with 46-51 blades, and variant 2 with 19-22 blades, the only difference between them being the location of the second cross**. It may be, that variant 5 with 10 blades should be included into variant 1, since the sequence of letters and crosses is the same. I separated the variant 5 signatures where the and the <+> do not seem to be made as separate signs, but the horizontal rods in and <+> are made with one horizontal rod, and not one separate for the and > <+>, that is a simplified way of forging. The signature variants 3 and 4 are more like exceptions, and variant 6 consists of 6 unique variants. Variant 7 consists of signatures which are badly preserved or the blades too corroded to allow deciding how the signatures were "written", and therefore could not be included in one of the defined variants.

Geographical distribution

enter image description here

On the distribution maps the find locations are marked within the boundaries of the modern states, for two reasons: the exact find locations are not known for all blades, and this way of mapping shows at a glance the distribution of the blades. This is sufficient for this study.

Map 1 shows the general distribution of the 166 Vlfberht blades about which I have found reliable information. The few more which have come to my knowledge too late to be integrated into this paper do not alter the way of thinking in this paper, and probably do not change the main trends in the find material.

The number of blades found in the Frankish Realm, Vlfberht's homeland (Belgium, France, western Germany, Italy, the Netherlands, Spain, Switzerland) is surprisingly small, a total of 16-19 blades, compared to 144-147 from pagan Europe plus 4 from Christian England. This ratio is observed throughout the Viking Age. It is especially improbable that Norway with a small population should have had so many more Vlfberht blades than the Franks themselves. Two factors greatly affect the distribution of the 11 swords: find circumstances and present research activity. A large part of the blades from pagan Europe comes from graves equipped with grave goods, while the blades from the Frankish Realm all come from rivers, or are single finds whose find circumstances are not known. Grave goods were not supposed to be given in Christian countries. The large number of swords found in Norway is the result of an especially generous burials rites. In Norwegian museums there are at least two and a half thousand double-edged swords and some six-seven hundred single-edged swords from the Viking Age. Modern research activity also influences the number of known Vlfberht blades, since more Vlfberht blades have been discovered each time the blades were examined for inlays. Especially two archaeologists have been active: A.N.Kirpičnikov examined a large number of blades in Norway, Sweden, and Old Rus’ (in Russia and Ukraine). Jorma Leppäaho did the same in Finland. But, all the same, the distribution reflects one indisputable reality: there must have been many swords during the Viking Age where many swords have been discovered.
- The Vlfberht Sword Blades Reevaluated, Anne Stalsberg, 2008

The University of Kiel website provides a convenient graph of Anne Stalsberg's findings. The table break the Stalsberg study's swords down into three categories according to age, as well as categories related to lettering variants:

Early Viking Age; sword blades with their main existence in the 9th century.

Middle Viking Age; swords with their main existence in the 10th century.

Late Viking Age; swords with their main existence in first half of the 10th century - 11th century.

Anne Stalsberg distinguishes between 7 spelling variants (including "non-definable") for the Ulfberht signature and the backside symbols but doesn't tie that to blade quality. The table below with only 5 variants does not include the "non-definables" and a group with only 2 undatable specimens.

Anne's time ranges are a tad unclear in the middle but the general time sequence is clear.

enter image description here
- University of Kiel

Correlation Between Spelling and Quality:

Williams, unlike Stalsberg, has also concluded that proper lettering (e.g., +VLFBERH+T) is positively correlated with higher metallurgic quality:

«Ulfberht» Swords:

The metallurgical results may be summarised as follows:

Group A: Swords with their maker’s name spelt: +VLFBERH+T Out of these 14 swords, nine are made of hypereutectoid steels, and a tenth may also have been. The others are all made of eutectoid steels, which might of course have come from a steel hypereutectoid in other places. So all 14 could have been made from a crucible steel, whatever the source of that might have been.

Group B: Swords with their maker’s name spelt the same way, but with the second cross in a different position: +VLFBERHT+ Out of these five swords, three were fully hardened and a fourth partly hardened. Three of the hardened 4 have only their edges made of steel, and although it is not possible to know what the bodies of the others were made of, it seems probable that they were all made the same way. Swords with their maker’s name as a variant spelling show more diverse microstructures.

Group C: These 14 are made of medium-carbon steel, at least in their edges. 6 had Steel edges hardened by quenching, including an unsuccessful attempt at quenching.

V (L)…(B)……T

A further 8 swords had Steel edges, but were not quenched.

+ VLBERHT + (+ Latin crosses)
H ┌ X I N T ┼
+ I I E...

Group D: Swords largely made of iron, or low-carbon steel. These 11 swords were of the lowest metallurgical quality, and also generally show the greatest variations in spellings.

…F V …
VLFB …H +..
+VI┐ IFR I + ┴
....R T …
┤ │┌ │ ┬ ┬ ┘┴ ┼
+ M├ B E RIT +
…....L F ΓH E T …


The original maker of the «Ulfberht» swords was evidently a craftsman (or perhaps a craftsman/merchant) who had access to a source of high-carbon steel. This may well have been ingots of crucible steel imported from the Middle East via the River Volga. In which case, his location was probably in the Baltic area, where this trade route terminated, and where most of these swords have been found.

Such a high-carbon steel would have needed to have been forged, counter-intuitively, at a lower temperature than customary. If forged at the correct temperature and for the correct time, the swords produced would have been both hard and tough, and would have been highly valued. So it is not surprising that many other swordsmiths tried to copy these swords, and also copy their maker’s inscription. One workshop, who made their swords with hardened steel edges, copied the spelling exactly, except for placing the terminal + in the wrong place. Other workshops, made swords of differing quality, and differing accuracy of spelling.
- A Metallurgical Study of Some Viking Swords, Alan Williams

The University of Kiel compiled Williams' data into this graph:

  1. Blade made from (one?) piece of hypereutectoid steel, i.e. the carbon concentration is larger than 0.8 %.

  2. Blade made from eutectoid steel (carbon concentration about 0.8 %).

  3. Hardened steel (around 0.4 % carbon) for the edges with a softer core.

  4. Unhardened steel (around 0.4 % carbon) for the edges with a (wrought) iron core.

  5. Wrought iron (less that 0.2 % carbon) throughout.

enter image description here
- University of Kiel


The actual numbers are unknown, but the largest study published to date identified the following:

  1. +VLFBERH+T: 46-51 known examples

  2. +VLFBERHT+: 18-23 known examples

  3. VLFBERH+T: 4-6 known examples

  4. +VLFBERH+T+: 1-2 known examples

  5. +VLFBERIIIT: 10 known examples


  7. Non-definable: 31-32 known examples

And as Williams shows above, in 55 VLFBERHT swords, accuracy in spelling (i.e., +VLFBERH+T) is positively correlated with the quality of the blade; the swords inscribed +VLFBERH+T are the highest quality, and the swords whose inscriptions deviated most from this spelling were also the lowest quality.

  • Should not your TLDR be 55 rather than 170? (By the way, love the answer and +1!) Commented May 23, 2016 at 23:16
  • @KorvinStarmast - No, Williams studied 55, Stalsberg studied 166 and mentioned 4 or 5 others. Thanks!
    – Wad Cheber
    Commented May 23, 2016 at 23:18
  • OK, better understand your breakdown. Commented May 24, 2016 at 2:37

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.