From the wikipedia article on Swedish iron mining during WW2, there are a lot of uncited claims. I'll quote the most outstanding of them here:

In the year before the war, Germany received 22 million tons of iron ore from various foreign sources. Although it was able to produce around 10m tons of its own iron ore each year, it was of low grade quality and needed to be mixed with high grade material from other countries such as Sweden, which annually supplied it with 9 million tons


Grand Admiral Raeder, head of the German navy, declared that it would be "utterly impossible to make war should the navy not be able to secure the supplies of iron-ore from Sweden".

Any truth to these?

Apparently the British thought it critical enough to try to interdict it, but never got much of a chance after Germany controlled Norway (1940 May onwards). Still, if it was this critical, you'd think there be sources. Just how dependent was Nazi Germany on Swedish iron ore? Would the Wermacht really grind to a halt without it?

I'm looking for documented numbers regarding this.

  • Well I would say they were dependent enough to start invasion of Norway & Denmark to secure that supply line. – NSNoob Jun 14 '16 at 6:02
  • Probably a bit less than UK dependency on Swedish ballpoint bearings. – liftarn Jun 14 '16 at 10:42
  • @SVilcans Do you have a source for that? With America shipping so much, can't believe that they couldn't replace ball bearings if for some reason Swedish exports were stopped. – DrZ214 Jun 14 '16 at 23:52
  • The distance from Lysekil to Humber is a bit less than crossing the Atlantic. According to hulldailymail.co.uk/Fishermen-s-secret-mission-war-Nazis-afloat/… it was quite important. – liftarn Jun 15 '16 at 7:03
  • 1
    @liftarn That link is dead now, but I opened a question about it: history.stackexchange.com/questions/44084/… – DrZ214 Mar 12 '18 at 8:58

The Plan R 4 article lists the following source:

Ziemke, Earl F. (2000) [1960]. "Chapter 2, The German Decision to Invade Norway and Denmark"., Command Decisions, United States Army Center of Military History. CMH Pub 70-7.

Quoting from the source, emphasis mine:

With due allowance for Hitler's tendency to play by ear, it can be said that the German interest in Norwegian neutrality at the beginning of the war was sincere. For Germany the advantages were substantial. Of the approximately six million tons of Swedish magnetite iron ore which Germany imported annually, about half passed through the Norwegian ice-free port of Narvik.

So while the numbers don't really match up (6 vs. 9 millions), the overall claim that Swedish ore was a significant ressource for Germany is legit.

Extending regarding the comment on total numbers:

This site lists 1937 worldwide iron ore production. It doesn't list its sources, but it looks far too detailed and matches with my knowledge of these matters at a glance, so I doubt the numbers are made up.

Copying the numbers (in per cent of global production) for iron ore, sorted:

  • USA, 38.0
  • USSR, 14.3
  • France, 11.7
  • Sweden, 9.3
  • Rest of British Empire, 5.9
  • UK, 4.4
  • Greater Germany (incl. Austria, Czech Protectorate), 4.1
  • Japan (incl. occupied territories), 2.2
  • Rest of French Empire, 1.8
  • Latin America, 1.4
  • Norway, 0.7
  • Italy, 0.5
  • Yugoslavia, 0.3
  • China, 0.2
  • Hungary, 0.1
  • Rumania, 0.1
  • Greece, 0.1

The overall global production for 1937 is given as 98.0 million metric tons.

In light of those numbers, I'd say six million tons of annual imports are pretty significant, especially since France is not yet conquered.

| improve this answer | |
  • This is good data, but we really need to compare Swedish iron ore with all other iron ore used by Germany. We need a number for total iron, then we can see what fraction Sweden made up. – DrZ214 Jun 14 '16 at 10:04
  • @DrZ214: Extended the answer. – DevSolar Jun 14 '16 at 10:20
  • Thanks. P.S., the 6M vs 9M could come from confusion over iron ore vs actual iron refined. IIRC, magnetite ore is typically 67% iron and 33% waste rock after refining. – DrZ214 Jun 14 '16 at 10:27
  • @DrZ214: Numbers in the chart were % global production, not million metric tons. Corrected in answer. Doesn't change the message, really. – DevSolar Jun 14 '16 at 11:10
  • Thanks this puts it all in perspective. Looks like France was roughly just as important, which was the next country to fall after Norway (and Sweden's concessions). – DrZ214 Jun 17 '16 at 21:07

It is not the number of tonnes that matter it is the quality of the iron ore. Wiki notes that the Swedish iron ore was of very high quality whereas German iron or was not. This matters for the following reasons:

  1. You can't build good tanks, ships etc with low quality iron ore. Without Sweden's high quality iron ore Germany's own iron ore was of limited use
  2. Mixing the iron ore's also made the steel making more efficient
  3. high quality iron ore actually contains a lot more iron per tonne
| improve this answer | |
  • I think I read somewhere that Swedish Iron was 98% pure, while other ores were typically only 33 to 50% pure (but cannot find the source now). However, I think any ore can be refined to pure Iron. It just takes more work to refine 33% ore than 98% ore. Germany should be capable of using low-quality ore, but just takes more work. – DrZ214 Mar 10 '18 at 12:49
  • Iron ore is one of Swedens most important export products. Yes, it is possible to refine iron ore which ain't as pure. But it will cost more, and that means a lot on a competitive market. – Ulf Tennfors Mar 10 '18 at 16:23

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.