Before the invention of the printing press and movable type (and some related innovations) by Johannes Gutenberg, books in Europe were generally only reproduced if someone copied them by hand.

In China, woodblock printing had existed for hundreds of years at that time. There was a flourishing industry of printed books, most of which did not use movable type.

Woodblock printing was known in Europe, and examples of pictures made with that technique exist from before Gutenberg's time. Books became widespread after Gutenberg, so there was a market for them.

Why didn't Europeans create books with woodblocks? If some examples of such books exist, why didn't they become widespread?

Addendum: Some commenters have expressed doubt that woodblock printing was a large industry in China. Here is a short encyclopedia entry that gives an overview of the history of commercial print publishing in China. While the great boom happened in and after the 16th century, commercial printing was common before that. And woodblock printing was the most common technique used until the 20th century.
While woodblock printing is arguably more suitable for the Chinese writing system than the scripts used in Europe, this shows that it is clearly possible to use woodblocks for book printing on a large scale. Saying "woodblock printing is impractical" is not a very good explanation.

  • 1
    I would suggest that advances in printing technology is likely well correlated with paper availability. Once a resource becomes easily available than technologies using that resource typically follow the same path. As so I would argue that the problem was not with the woodblocks but with the printing medium quality/scarcity (just to be clear: I'm speculating, this is not an answer).
    – armatita
    Commented Sep 27, 2018 at 15:29
  • 1
    I read one story about Gutenberg that he was printing with woodblocks, spoiled one, and started cutting it apart to make moveable type. I don't remember where, or how accurate it is. Commented Sep 27, 2018 at 16:04
  • 2
    You could also ask why they did not print with metal letters before Gutenberg started using this method. Somebody else could have popularized this, right? Commented Sep 27, 2018 at 19:09
  • 2
    @DavidThornley: What I'd been told is that Gutenberg's real achievement was the ability to mass-produce pieces of type. Each wood block or piece of type would have only been good for somewhere between a few dozen and a few thousand copies before quality deteriorated unacceptably. If the type on a page wore out, the time required to re-set the page with freshly cast type and the amortized time to cast new batches of letters would be far less than the time to carve all of the letters on the page.
    – supercat
    Commented Sep 27, 2018 at 20:45
  • 2
    It was used. Just didn't make any real impact since you still had to carve one Block per page (and woodblocks get worn out pretty quick)
    – Hobbamok
    Commented Sep 28, 2018 at 9:18

2 Answers 2


First I would say that during the medieval period the demand for books was much lesser than after the books became comparatively cheap after Gutenberg. The key here is the expense a quickly worn out woodblock presents that could only be used for one page. Whereas you already mentioned the crucial innovation for European book printing Gutenberg is known for: moveable type! Xylography is expensive. Although that is just one societal pre-condition for a breakthrough, or in this case: explosion.

For the demand part, cf Lotte Hellinga: "The Gutenberg Revolutions", p207–219, in: Simon Eliot & Jonathan Rose (Eds): "A Companion to The History of the Book", Blackwell: Malden, Oxford, 2007. And:

The emergence of a literate middle class in the later Middle Ages created a demand for new types of books. These tended to be popular works of a recreational or technical nature, which were often in the vernacular. We know very little about the beginnings of the book trade outside of the monasteries and universities, but certainly there was an independent trade by the late twelfth century. University stationers were free to engage in outside trade and no doubt did so. Books seem most often to have been made to order, but also occasionally for speculation--with no specific buyer in mind. Some orders were large: in 1437 a wholesale bookseller sent an order to a scriptorium in the Low Countries for 200 copies of the Seven Penitential Psalms, 200 copies of Cato's Disticha in Flemish, and 400 copies of a small prayer book.
— Richard W. Clement: "Medieval and Renaissance book production", Utah State University Library Faculty & Staff Publications, Paper 10, 1997. (Online)

Keep in mind that a woodblock in action seems like a great time and cost saver compared to a slow scribe. But that block needs to be perfect. One error and you need a whole other block to start from scratch.

Then there is a slight misconception apparent in how the question is framed. It is correct to describe Gutenberg's innovation as printing (with moveable type). But one of the things he 'stole' to combine it into something fresh was that he took a press from wine making – or even paper production –for his purposes.

This press and its great forces is the biggest cause for wearing out a woodcut so quickly. Using much less force – doing that by hand – is called a rubbing. This technique was apparently used by ancient Egyptians and never ceased to be used on a variety of materials. The techniques of stamping and modeling were also known and used.

That leads to the supply side of the equation. It features the materials needed. Vellum, parchment and papyrus are not really well suited for printing and paper was late to the party in Europe. Earliest book on paper, partially, and imported, made in Europe seems to be the Missal of Silos, dated to 1151.

Second: but they did print with woodblocks before Gutenberg:

A deceased Abbess of Mechelen in Flanders in 1465 had "unum instrumentum ad imprintendum scripturas et ymagines … cum 14 aliis lapideis printis" ("an instrument for printing texts and pictures … with 14 stones for printing") which is probably too early to be a Gutenberg-type printing press in that location.
WP: Woodblock printing

Or put in another way:

The so-called wood plate printing belongs to the common printing technique of the 14th century. It was popular in Europe until Johannes Gutenberg invented letterpress printing and was used to print any kind of text on paper.
Ein frühes Druckverfahren – der Holztafeldruck (my translation)

It is just that Gutenberg's inventions (let's call it like that for the purpose of this question) was so disruptive that we now tend to overlook 2 centuries of printing in Europe, because of their small scale.

Exactly dating this block printing of whole books seems contested. But it seems to be at least accepted by some between before 1420 and 1451.

If we had as many early prints as we have Greek pots, we would ont have to guess about practically all the beginnings of printmaking

First dated prints

Few early prints can be dated precisely. A Dutch Madonna has 1418 carved on the block, but the surviving impression is too heavily painted and damaged to reproduce clearly. The next preserved date, 1423, occurs on a south German Saint Christopher, whose drapery flows in the wind as it then did in paintings. (After about 1460 northern drapery straightens out and and breaks at angles.) The earliest datable Italian print was the subject of a miracle in 1428, when it was tacked to a schoolroom wall in Forli. There it certainly would have yellowed until it was thrown away had not the school caught fire one february day. The crowd that gathered outside saw this paper shoot up out of the flames, hover over the hot updraft, and flutter down into their hands. With cries of "Miracle!" (and who could resist?) the print was carried into the cathedral.
— Alpheus Hyatt Mayor: "Prints & People: A Social History of Printed Pictures", Metropolitan Museum of Art: New York, 1971. (On gBooks)

This is one of the earliest known dated European woodblock prints or woodcuts. It is a portrait of St. Christopher dated 1423 preserved in the John Rylands Library, Manchester, England:

enter image description here

This is of course not the only acceptable view on that matter:

Printing onto cloth had spread much earlier, and was common in Europe by 1300. "In the 13th century the Chinese technique of blockprinting was transmitted to Europe," soon after paper became available in Europe. The print in woodcut, later joined by engraving, quickly became an important cultural tradition for popular religious works, as well as playing cards and other uses.
Prologue To Graphic Design – The Asian Contribution Woodblock printing>

That means once the demand was recognised different techniques were experimented on to improve on the works of scribes at roughly the same time. Woodblock printing was used quite early on but was quickly diagnosed with all its problems and people realised that for quick, cheap and large volumes, woodcut just wasn't cutting it.

One interesting side note for "why not for [insert your deity]":

The printing trade in Europe was one of the first business sectors governed by capitalist principles, whereas the invention and subsequent development of book printing in East Asia were motivated less by financial interests than religious considerations or initiatives of monarchs devoted to the dissemination of certain texts. Thus it comes as no surprise that the earliest printed products were texts of a religious nature. The oldest woodblock print, a Buddhist Dharani-Sutra scroll probably produced in China between 704 and 751 and measuring only eight centimeters in height but six meters in length, was discovered in southeastern Korea in 1966.

While Arabian woodblock prints are known to have existed since the tenth century, religiously motivated respect for the written word handed down in manuscript form prevented the establishment of printing firms in Islamic countries until well into the eighteenth century.
Book printing was not always welcomed with open arms in Europe. The Church feared that heresies would be disseminated, primarily in vernacular publications. […] It is astonishing to realize that a number of universities initially had reservations about book printing. Although every university city in Germany, with the exception of Greifswald, had a printing shop in the fifteenth century, publications by faculty members were quite rare.
Urs Leu: "Not everyone was pleased about the invention of book printing. The church and some universities were skeptical." Swiss Nationalmuseum

Addresssing the update to the question:

While woodblock printing is arguably more suitable for the Chinese writing system than the scripts used in Europe, this shows that it is clearly possible to use woodblocks for book printing on a large scale. Saying "woodblock printing is impractical" is not a very good explanation.

Cynthia Brokaw: "Publishing and Popular Literature in Imperial China"
(DOI: 10.1093/acrefore/9780190277727.013.151)
By the 18th century, the population increase and growing demand for texts—and the spread of woodblock printing to the interior and hinterland—ensured the dissemination of a common core of universally popular fictional works throughout China Proper. It was not, however, until the early 20th century and the widespread adoption of mechanized printing, that a true mass readership developed.

Describes precisely why "woodblock printing is impractical". It is expensive and slow and the matrices wear out too quickly under stress. Cost can be driven down with metal while volume increases.

Continuing a trend that began in the late Ming, the cost of cutting woodblocks—by far the most expensive part of the production process—declined, so that investing in commercial publishing became a reasonably attractive enterprise.

For cutting a woodblock you need an expert. For typesetting in metal you arguably need also an expert, but one on a much lower level of expertise. While Gutenberg himself and many other prints after the 42-line bible displayed remarkable craftsmenship, after the incunable era the overall decline in typographic quality for example was readily apparent and only repeated in modern times with the introduction of word processors and DTP.

Comparing the differences between China and Europe, one is also easily mislead by the just quoted article:

Although scribal manuscripts still dominated and continued to exist in China until at least the nineteenth century, China has the longest history of printing in the world.[…]
The nature of Chinese written language limited the practicability and potential use of movable-type printing in China. Since the language consists of thousands of ideograms, grouping and assembling the types is labour intensive and required considerable linguistic knowledge from the workers. Movable-type printing is economically suitable for large quantities for a single run, whereas block printing is more desirable for small quantities produced over long periods of time. The latter was ‘precisely the pattern of book demand and supply in traditional Chinese society’, therefore movable-type did not replace block printing.[…]
Through the examinations of printing technologies, literacy and urbanisation, books prices and access to and control over knowledge, it concludes that the circulation of books in China was substantially smaller than in Europe. It has also analysed the demand for and supply of books containing potentially useful knowledge. The limited data available shows that there was continuity under Song-Yuan-Ming dynasties and that could be correlated with slow but steady technological advance over these centuries. On a per capita basis, growth of book production and circulation declined significantly from the Qing onwards. The decline can be linked to stronger state control over the dissemination of knowledge which can be dated to the early Ming but intensified under the Qing, even though commercialisation of book production expanded under both dynasties. Hierarchy in the Chinese knowledge system is apparent. Books on useful knowledge constituted but a small share of a larger number of books produced, published and preserved throughout the Chinese history. Priority was accorded to Confucian classics and histories. Books may have played a more limited role than was the case in Europe as conduits linking theoretical to tacit knowledge.
— Ting Xu: "The Production and Circulation of Manuscripts and Printed Books in China Compared to Europe, ca. 581-1840", Working Papers in Technology Governance and Economic Dynamics no. 53, 2013. (PDF)

  • 6
    "Gutenberg's invention (let's call it like that for the purpose of this question)" - whats with all that salt? I'm 90% sure this will lead to a real scotsman fallacy, but I'm still gonna ask - what makes the printing press not a "real" invention in your view?
    – R. Schmitz
    Commented Sep 28, 2018 at 8:48
  • 1
    Further to your point about heresies, it went deeper than that, as demonstrated by Tyndall's translation into English. The Church's concern was not that the Bible would be interpreted incorrectly, but quite simply that lay people would have any access at all. By being in control of access, they maintained control of people by the Kafka-esque method of being able to bring accusations of religious crimes which lay people had no way of knowing or defending.
    – Graham
    Commented Sep 28, 2018 at 9:00
  • 1
    @R.Schmitz There are more names attached to 'this' invention, or his invention. Not only many names but also a lot of Asians we have no way of addressing by name. That he combined a lot of prior art into something very useful (inventions if you like) is not the point, the 'big man' narrative is. His ideas about ink may have been bigger than the rest. Then there is Mr Coster Commented Sep 28, 2018 at 9:08
  • @LangLangC Oh, the emphasis in that sentence is on "Gutenberg" and not on "invention". Sorry, I misunderstood that.
    – R. Schmitz
    Commented Sep 28, 2018 at 9:13
  • 3
    @R.Schmitz "Gutenberg" is incredibly useful for naming a fundamental change that took place. Gutenberg himself was also a clever man, no doubt. This is not to discredit him or the importance of printing. Just a little sidenote to foster remembrance of the multistage and multipeople process instead of an imagined singularity derived from naming. –– Nevertheless, thank you. Rereading that sentence revealed some kind of sloppiness on my part to me. Commented Sep 28, 2018 at 9:20

Partial answer

In fact, the earliest printing technology wasn’t for written text at all. There are silk fragments from the Han Dynasty (206 BCE-220 CE) in China that have flowers printed on them using a woodcut illustration. Woodblock printing, aka xylography, can be used for printing words as well, but it has a number of downsides: it’s hard to create very precise images, and the block degrades over time from use, the wood softening and wearing down. Plus it’s all well and good to carve a page of text into wood . . . but when it comes time to print page two, you have to start all over again. And while there are ways to edit if you make a mistake, on the whole, it’s pretty inflexible. M. Brennan

There is a tension between what Ms. Brennan (Dr. Brennan?) states and OP's question - she implies that xylography was not used for books, but for art. (and elsewhere in her essay she suggests that the nature of ideographic writing is ill suited to xylography.)

Wikipedia suggests that many copies of a few books were printed - which reconciles some of the tension between OP & Brennan. It appears that most of the books printed were religious texts (where "perfection" is an act of devotion as much as it is of manufacture).

I don't have an answer, but I'm posting this in the hopes that it may help someone else to develop a better answer.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.